|
| |
TM 5-2420-222-20-2
STEERING VALVE-TO-TRANSMISSION RETURN OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
28. Loader backhoe
Batteries
Install (page 2-692).
29.
Battery ground
Install (page 2-696).
cable
30.
Transmission
Fill (page 2-811).
31.
Engine
Start and run at high idle
(TM 5-2420-222-10).
32.
Steering valve-to-
a. Check for leaks.
transmission
b. If leaking at any connection, tighten
return oil line
using 5/8-inch and/or 11/16-inch
and/or 7/8-inch open-end wrenches,
or 1 1/8-inch combination box and
open-end wrench.
c. If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing or
line as outlined in this task.
d. If leak was found, repeat step 30.
33.
Engine
If still running, shut down
(TM 5-2420-222-10).
NOTE
FOLLOW-ON MAINTENANCE:
1. Install right inner platform ramp (page 2-1095).
2. Install left outer platform ramp (page 2-1073).
3. Install cowl front cover (page 2-1020).
TASK ENDS HERE
2-992
|
