|
| |
TM 5-2420-222-20-2
STEERING VALVE-TO-TRANSMISSION RETURN OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
4. Line (9)
Clamp (5)
Using 1/4-inch flat-tip screwdriver,
spread apart and take off.
WARNING
Do not attempt to disconnect hydraulic lines and fittings while engine is running or before hydraulic system
pressure has been released. When engine is running, hydraulic system is under pressure. Hydraulic
system pressure should be 0 psi (0 kPa) before lines are disconnected. A line or fitting disconnected
under pressure will blow off with a lot of force and could cause serious injury to personnel.
Be careful when draining hot fluids. Wear gloves to protect your hands from hot parts and fluids or severe
burns could result.
5. Elbow (10)
Line (9)
a. Place drain pan underneath to catch
draining fluid.
b. Using 11/16-inch open-end wrench,
unscrew and take off.
TA243202
2-987
|
