|
| |
TM 5-2420-222-20-2
STEERING VALVE OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
29. Engine block (1)
Bracket (2)
Place in position.
30. Engine block (1)
Screw (3) and
Screw in and tighten using 3/4-inch,
and bracket (2)
new lockwasher (4)
3/8-inch drive socket and ratchet handle.
31. Two lines (5 and 6)
Two clamps (7)
Place in position.
and spacer (8)
32. Bracket (2), two
Screw (9),
Screw together and tighten using 9/16-
clamps (7), and
new lockwasher (10),
inch, 3/8-inch drive socket, ratchet
spacer (8)
and nut (11)
handle, and 9/16-inch box wrench.
33. Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
34.
Engine
Start and run at high idle
(TM 5-2420-222-10).
35.
Steering valve
a. Operate steering (TM 5-2420-222-10)
oil lines
and check for leaks.
b. If leaking at any connection on loader
backhoes with Serial Numbers 235786
thru 235999, tighten using open-end
wrench.
c. If leaking at any connection on loader
backhoes with Serial Numbers 319995
thru 342573, tighten using 5/8-inch
and 11/16-inch open-end wrenches or
5/8-inch and 7/8-inch open-end
wrenches.
d. If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing or
line as outlined in this task.
e. If leak was found, repeat step 33.
36.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-976
|
