| |
TM 5-2420-222-20-2
STEERING VALVE OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
21. Elbow (1) and
Nut (3)
a. On loader backhoes with Serial Numbers
steering valve (2)
235786 thru 235999, using open-end
wrench, tighten until seated against
valve (2).
b. On loader backhoes with Serial Numbers
319995 thru 342573, using 518-inch and
7/8-inch open-end wrenches, tighten
until seated against valve (2).
NOTE
If right steering valve oil line is being installed, skip steps 22 thru 24.
22. Steering valve (2)
Elbow (4)
Using 5/8-inch open-end wrench, tighten
to position noted during removal.
23. Steering valve (2)
Nut (5)
Using 5/8-inch and 7/8-inch open-end
and elbow (4)
wrenches, tighten until seated against
valve (2).
24. Elbow (4)
Line (6)
a. Unplug.
b. Take off tag.
c. Screw on and tighten using 5/8-inch
open-end wrench.
25. Elbow (1)
Line (7)
a. Take off tag.
b. On loader backhoes with Serial Numbers
235786 thru 235999, screw on and
tighten using open-end wrench.
c. On loader backhoes with Serial Numbers
319995 thru 342573, screw on and
tighten using 5/8-inch open-end
wrench.
26. Hose (8)
Line (7)
a. Uncap hose (8).
b. On loader backhoes with Serial Numbers
235786 thru 235999, screw on and
tighten using open-end wrench.
c. On loader backhoes with Serial Numbers
319995 thru 342573, screw on and
tighten using 5/8-inch and 11/16-inch
open-end wrenches.
d. Repeat steps 18 thru 26 for right
side as needed.
2-974
|