|
| |
TM 5-2420-222-20-2
SPECIAL ELBOW-TO-LEFT STEERING CYLINDER OIL HOSE (SERIAL NUMBERS 235786 THRU 235999
ONLY)
This task covers:
a.
Removal (page 2-950)
c.
Inspection/Replacement (page 2-952)
b.
Cleaning (page 2-951)
d.
Installation (page 2-952)
INITIAL SETUP
Tools
Materials/Parts - Continued
Knife, pocket
Solvent, drycleaning (item 28, Appendix C)
Pan, drain
Tags, marking (item 30, Appendix C)
Wrench, open-end
Personnel Required
Materials/Parts
One
Detergent, GP (item 7, Appendix C)
Packing, hose elbow-to-cylinder
Equipment Condition
Rags, wiping (item 21, Appendix C)
Hydraulic system pressure released
(page 2-1191)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not attempt to disconnect hydraulic lines and fittings while engine is running or before hydraulic system
pressure has been released. When engine is running, hydraulic system is under pressure. Hydraulic
system pressure should be 0 psi (0 kPa) before lines are disconnected. A line or fitting disconnected
under pressure will blow off with a lot of force and could cause serious injury to personnel.
Be careful when draining hot fluids. Wear gloves to protect your hands from hot parts and fluids or severe
burns could result.
1.
Hose elbow (1)
Hose (2)
a.
Place drain pan underneath to catch
draining fluid.
b.
Using open-end wrench, unscrew and
take off.
2.
Cylinder (3) and
Nut (4)
Using open-end wrenches, loosen.
hose elbow (1)
2-950
|
