TM 5-2420-222-20-2 STEERING VALVE OIL LINE-TO-RIGHT STEERING CYLINDER OIL HOSE (SERIAL NUMBERS 235786 THRU 235999 ONLY) - CONTINUED ACTION LOCATION ITEM REMARKS INSTALLATION 11. Steering line(1) Hose (2) a. Take off tag. b. Uncap line (1). c. Screw in and tighten using open-end wrench. 12. Special elbow (3) Nut (4) Screw on all the way. 13. New packing (5) Place in position. 14. Cylinder (6) Special elbow (3) a. Uncap cylinder(6). with assembled parts b. Screw into same relative position noted during removal. 15. Special elbow (3) Nut (4) Using open-end wrench, tighten until and cylinder (6) seated against cylinder (6). 16. Special elbow (3) Two hoses (2 and 7) a. Uncap hose (7). b. Screw on and tighten using open-end wrench. 17. Loader backhoe Transmission Check fluid level and add proper amount and grade (TM 5-2420-222-10). 18. Engine Start and run at high idle (TM 5-2420-222-10). 19. Steering valve oil a. Operate steering (TM 5-2420-222-10) line-to-right and check for leaks. cylinder oil hose b. If leaking at any connection, tighten using open-end wrench. c. If leaking does not stop, shut down engine (TM 5-2420-222-10) and replace leaking connection packing or hose as outlined in this task. d. If leak was found, repeat step 17. 20. Engine If still running, shut down (TM 5-2420-222-10). 2-948