|
| |
TM 5-2420-222-20-2
STEERING VALVE OIL LINE-TO-RIGHT STEERING CYLINDER OIL HOSE (SERIAL NUMBERS 235786
THRU 235999 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2.
Special elbow (1)
Nut (3)
Using open-end wrench, loosen.
and cylinder (2)
3.
Cylinder (2)
Special elbow (1)
a.
Note relative position for proper
with assembled parts
placement during assembly.
b.
Using open-end wrench, unscrew and
take out.
c.
Cap cylinder (2) (page 2-137).
4.
Special elbow (1)
Packing (4)
a.
Using pocket knife, take off.
b.
Get rid of.
5.
Steering line (5)
Hose (6)
a.
Place drain pan underneath to catch
draining fluid.
b.
Using open-end wrench, unscrew and
take out.
c.
Cap line (5) (page 2-137).
d.
Get rid of drained fluid (page 2-137).
e.
Tag (page 2-137).
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
6.
Hose (6)
a.
Using clean rags dampened in solution
of detergent and water, wipe clean.
b.
Using clean rags dampened with clean
water, rinse.
c.
Using clean, dry rags, wipe dry.
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use
near open flame or excessive heat. The flashpoint is 100°F to 138°F (38° to 59°C). If you become dizzy
while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
7.
Special elbow (1)
a.
Clean in drycleaning solvent.
b.
Using clean, dry rags, wipe dry.
2-946
|
