|
| |
TM 5-2420-222-20-2
TIE ROD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
38.
Steering arm (1)
Steering
Move into position.
cylinder (2)
39.
Steering arm (1)
Pin (3)
Using 3-pound head cross-peen hammer,
and steering
drive in.
cylinder (2)
40.
steering arm (1)
New cotter pin (4)
a.
Place in position.
and pin (3)
b.
Using multiple tongue and groove slip-
joint pliers, bend ends back.
41.
Loader backhoe
Front wheels
a.
Only on loader backhoes with Serial
Numbers 235786 thru 235999, turn
wheels all the way left
(TM 5-2420-222-10).
b.
Repeat steps 38 thru 40 for right side.
ADJUSTMENT
42.
Loader backhoe
Front wheels
Turn to straight ahead position
(TM 5-2420-222-10).
WARNING
Lift loader backhoe on level ground or it may become unstable. Place wood blocks in front of and
behind rear tires to keep loader backhoe from rolling in either direction. Do not get under loader
backhoe or place feet or hands under wheels when wheels are off ground unless loader backhoe
is securely in place on trestles or severe injury may result. Do not support more than two wheels
off ground at one time or loader backhoe may become unstable.
43.
Loader backhoe
Two rear tires (5)
If not already blocked, place wood blocks
in front of and behind.
44.
Front axle (6)
Using 10-ton capacity hydraulic dolly
type jack, lift until two front tires
(7) are off of ground.
2-936
|
