|
| |
TM 5-2420-222-20-2
FRONT TIRE AND WHEEL ASSEMBLIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT- CONTINUED
8.
Wheel with
Inspect (TM 9-2610-200-14).
assembled tire
9.
Eight hub bolts (1)
Look for cracks, breaks, bends, and
damaged threads
REPAIR
10.
Wheel with
Repair (TM 9-2610-200-14).
assembled tire
INSTALLATION
11. Hub (2)
Wheel (3) with
a.
Using 26-inch pinch bar, aline hub
assembled tire (4)
holes with wheel holes.
b.
Place in position.
12.
Hub (2) and
Eight hub bolts (1)
Screw in and tighten until snug using
wheel (3)
718-inch, 112-inch drive socket, 10-Inch
extension, and ratchet handle.
WARNING
Lift loader backhoe on level ground or it may become unstable. Place wood blocks
in front of and behind rear tires to keep loader backhoe from rolling in either
direction. Do not get under loader backhoe or place feet or hands under wheels
when wheels are off ground unless loader backhoe is securely in place on trestles
or severe injury may result. Do not support more than two wheels off ground at one
time or loader backhoe may become unstable.
13. Counterweight (5)
Front axle (6)
a.
Using 10-ton capacity hydraulic dolly
type jack at counter weight (5), lift
off of 5-ton capacity motor vehicle
trestle.
b.
Take 5-ton capacity motor vehicle
trestle out from underneath.
c.
Using 10-ton capacity hydraulic dolly
type jack, lower just enough to keep
wheel (3) with assembled tire (4) from
rotating.
Change 1 2-902
|
