|
| |
TM 5-2420-222-20-2
FRONT TIRE AND WHEEL ASSEMBLIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Lift loader backhoe on level ground or it may become unstable. Place wood blocks
in front of and behind rear tires to keep loader backhoe from rolling in either
direction. Do not get under loader backhoe or place feet or hands under wheels
when wheels are off ground unless loader backhoe is securely in place on trestles
or severe injury may result. Do not support more than two wheels off ground at one
time or loader backhoe may become unstable.
1. Loader backhoe
Two rear tires (1)
Place wood blocks in front of and behind.
2. Hub (2) and
Eight hub bolts (4)
Using 7/8-inch, 1/2-inch drive socket,
wheel (3)
10-inch extension, and ratchet handle,
loosen.
3. Counterweight (5)
Front axle (6)
a.
Using 10-ton capacity hydraulic dolly
type jack at counterweight (5), lift
until front tire (7) is off ground.
b.
Place 5-ton capacity motor vehicle
trestle underneath set high enough to
keep front tire (7) off ground when
lowered.
c.
Using 10-ton capacity hydraulic dolly
type jack, lower onto 5-ton capacity
motor vehicle trestle.
4. Hub (2) and
Eight hub bolts (4)
Using 7/8-inch, 1/2-inch drive socket,
wheel (3)
10-inch extension, and ratchet handle,
unscrew and take out.
5. Hub (2)
Wheel (3) with
Take off.
assembled tire (7)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
6.
Wheel with
Clean (TM 9-2610-200-14).
assembled tire
Change 1 2-900
|
