|
| |
TM 5-2420-222-20-2
SERVICE BRAKE PEDALS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
To aline brake pedals, perform steps 29 thru 31 on the highest brake pedal only. If brake pedals
are alined, skip steps 29 thru 31.
29. Hydraulic cylinder
Nut (3)
Using two 9/16-inch open-end wrenches,
(1) and screw (2)
loosen.
Do not allow brake pedal stop screw
to turn or adjustment will be improper.
30. Hydraulic cylinder
Screw (2)
Using 9/16-inch open-end wrench, un-
(1) and brake pedal
screw up to one-third turn.
(4 or 5)
Screw must not be unscrewed more
than one-third turn to aline pedals.
2-897
|
