|
| |
TM 5-2420-222-20-2
RIGHT SERVICE BRAKE LINE AND FITTINGS - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install right platform (page 2-1079). -
TASK ENDS HERE
LEFT SERVICE BRAKE LINE AND FITTINGS
This task covers:
a.
Removal
c.
Inspection
e.
Pre-Load Check of Bearing
b.
Disassembly
d.
Reassembly
f.
Installation
INITIAL SETUP:
Tools
Materials/Parts
Handle, ratchet, 3/8-inch drive
Packing, elbow-to-connector
Knife, pocket
Packing, elbow-to-seat
Pan, drain
Rags, wiping (item 21, Appendix C)
Screwdriver, 1/4-inch, flat-tip
Solvent, drycleaning (item 28, Appendix C)
Wrench, open-end, 7/16-inch
Wrench, open-end, 1/2-inch
NOTE
NOTE
The following part only applies
to loader backhoes with Serial
The following tool only applies
Numbers 235786 thru 235999.
to loader backhoes with Serial
Numbers 235786 thru 235999.
Lockwasher, clamp screw (two required)
Socket, 3/8-inch drive, 9/16-inch
Personnel Required
NOTE
Two
The following tool only applies
Equipment Condition
to loader backhoes with Serial
Numbers 319995 thru 342573.
Right platform removed (page 2-1079)
Socket, 3/8-inch drive, 3/4-inch
2-884
|
