|
| |
TM 5-2420-222-20-2
RIGHT SERVICE BRAKE LINE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Clamp (1) and
Screw (3),
a.
Using 9/16-inch, 3/8-inch drive sock-
bracket (2)
lockwasher (4),
et, ratchet handle, and 9/16-inch box
and nut (5)
wrench, unscrew and take apart.
b.
Get rid of lockwasher (4).
2. Bracket (2) and
Clamp (1)
Take off.
brake oil line (6)
3. Bracket (2)
Screw (7) and
a.
Using 9/16-inch box wrench, unscrew
lockwasher (8)
and take out.
b.
Get rid of lockwasher (8).
4. Brake oil line (6)
Bracket (2)
Take off.
5. Elbow (9)
Brake oil line (6)
a.
Place drain pan underneath elbow (9).
b.
Using 7/16-inch open-end wrench, un-
screw and take off.
6.
Nut (10)
Using 7/16-inch and 1/2-inch open-end
wrenches, loosen.
7. Seat (11)
Elbow (9) with
a.
Note relative position for proper place-
assembled parts
ment during installation.
b.
Using 7/16-inch open-end wrench, un-
screw and take out.
c.
Plug seat (11) (page 2-137).
8. Elbow (9)
Packing (12)
a.
Using pocket knife, take off.
b.
Get rid of.
9. Elbow (13)
Brake oil line (6)
a.
Place drain pan underneath elbow (13).
b.
Using 7/16-inch open-end wrench, un-
screw and take off.
10.
Nut (14)
Using 7/16-inch and 1/2-inch open-end
wrenches, loosen.
11. Connector (15)
Elbow (13) with
a.
Note relative position for proper place-
assembled parts
ment during installation.
b.
Using 7/16-inch open-end wrench, un-
screw and take out.
c.
Plug connector (15) (page 2-137).
d.
Get rid of drained fluid (page 2-137).
2-880
|
