|
| |
TM 5-2420-222-20-2
HYDRAULIC BRAKE SYSTEM BLEEDING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
BLEEDING - CONTINUED
NOTE
If step 18 was performed, skip steps 19 thru 23.
19.
Hydraulic
Filler plug (2)
Using 1 1/2-inch open-end wrench,
cylinder (1)
with assembled
unscrew and take out.
packing (3)
20.
Filler plug (2)
Packing (3)
a.
Using pocket knife, take off.
b.
Get rid of.
21.
Transmission
Hydraulic
If not full, fill with proper amount
case (4)
cylinder (1)
and grade of hydraulic fluid
(LO 5-2420-222-12).
22.
Filler plug (2)
New packing (3)
Place in position.
23.
Hydraulic
Filler plug (2)
Screw in and tighten using 1 1/2-inch
cylinder (1)
with assembled
open-end wrench.
packing (3)
24.
Left axle
Special screw (6)
a.
Have assistant depress left brake
housing (5) pedal (7).
b.
Check for leaks.
c.
If leaking, using 318-inch box wrench,
tighten.
d.
If leaking does not stop, replace
(page 2-876).
e.
Have assistant release left brake
pedal (7).
25.
Left brake pedal (7)
Brake pedal lock (9)
Have assistant push down to lock.
and right brake
pedal (8)
26.
Special screw (6)
Brake cap (10)
Place in position.
27.
Operator’s
Right platform
If removed, install (page 2-1079).
compartment
2-874
|
