|
| |
TM 5-2420-222-20-2
HYDRAULIC BRAKE SYSTEM BLEEDING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
BLEEDING - CONTINUED
11.
Left brake pedal (1)
Brake pedal lock (3)
Have assistant push up to unlock.
(1) and right brake
pedal (2)
CAUTION
To prevent damage to hydraulic cylinder parts, do not allow the brake pedal to return sharply.
NOTE
Hydraulic cylinder reservoir must be refilled after each 15 strokes of brake pedal.
12.
Hydraulic
Left brake pedal (1)
a.
Have assistant depress and release un-
cylinder (4)
til fluid in nonmetallic tubing is free of
air bubbles or until 15 strokes have been
completed.
b.
If 15 strokes have been completed and
air bubbles are still present in fluid,
refill hydraulic cylinder reservoir by
performing step 1 or steps 3 thru 5,
then repeat step 12.
c.
When air bubbles are no longer present
in fluid, have assistant depress all
the way and hold.
13.
Left axle
Special screw (6)
a.
Using 3/8-inch box wrench, tighten.
housing (5)
b.
Take off nonmetallic tubing.
14.
Hydraulic
Left brake pedal (1)
Have assistant release.
cylinder (4)
15.
Transmission
Filler tube (8)
Take out nonmetallic tubing.
cover (7)
16.
Filler tube (8)
Dipstick (9)
a.
Slide in all the way.
b.
Tighten.
17.
Center platform (10)
Filler lock (11)
Move over top of dipstick (9).
2-872
|
