|
| |
TM 5-2420-222-20-2
PARKING BRAKE LEVER AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
44.
Brake lever (1),
Button (10)
Screw on and tighten using clean rag and
spring (9), and
slip-joint pliers.
brake latch rod (5)
45.
Brake lever (1)
Brake rod (11)
Place in position.
46.
Brake lever (1) and
Pin (12)
Slide in.
brake rod (11)
47.
Brake rod (11) and
New cotter pin (13)
a.
Place in position.
pin (12)
b.
Using slip-joint pliers, bend ends back.
48.
Brake lever
Brake latch
a.
Position brake lever support (14) in
support (14)
plate (2)
machinist’s vise.
b.
Place in position.
49.
Brake lever support
Two screws (15), new
Screw together and tighten using 3/8-inch
(14) and brake latch
lockwashers (16),
flat-tip screwdriver and 3/4-inch box
plate (2)
and nuts (17)
wrench.
50.
Brake lever (1)
a.
Apply light coating of grease to bearing
with assembled parts
surface (LO 5-2420-222-12).
b.
Slide on.
2-863
|
