|
| |
TM 5-2420-222-20-2
PARKING BRAKE LEVER AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
10.
Stud (1) and brake
Locknut (3)
a.
Only on loader backhoes with Serial
lever support (2)
Numbers 235786 thru 235999, using
xx-inch, 1/2-inch drive socket,
ratchet handle, and xx-inch open-end
wrench, unscrew and take off.
b.
Get rid of.
11.
Brake lever support
Two screws (5),
Using 3/4-inch, 1/2-inch drive socket
(2) and right axle
washers (6), and
and ratchet handle, unscrew and take out.
housing (4)
washers (7)
12.
Right axle housing
Brake lever support
Take off.
(4) and stud (1)
(2) with assembled
with locknut (8),
parts
if present
NOTE
Steps 13 and 14 only apply to loader backhoes with Serial Numbers 235786 thru 235999.
13.
Stud (1)
Locknut (8)
a.
Using xx-inch, 1/2-inch drive socket
and ratchet handle, unscrew and take
off.
b.
Get rid of.
14.
Transmission top
Stud (1)
Using 1/2-inch drive stud remover and
cover (9)
setter, unscrew and take apart.
DISASSEMBLY
15.
Brake lever support
Snapring (11)
a.
Position support (2) in machinist’s
(2) and washer (10)
vise.
b.
Using retaining ring pliers, take off.
16.
Brake lever
Washer (10)
Take off.
support (2) and
brake lever (12)
2-858
|
