|
| |
TM 5-2420-222-20-2
ENGINE OIL PRESSURE SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
8.
Engine
Start and run at high idle
(TM 5-2420-222-10).
9.
Flywheel
Pressure switch (2)
Check for leaks.
housing (1)
If it is not leaking, skip steps
10 thru 11.
10.
Terminal (3)
Connector (4)
a.
Shut off engine (TM 5-2420-222-10).
b.
Tag (page 2-137).
c.
Unplug.
11.
Flywheel
Pressure switch (2)
a.
Using 1/2-inch drive socket and ratchet
housing (1)
handle, tighten.
b.
Start engine (TM 5-2420-222-10).
c.
Check for leaks.
d.
If leaking has not stopped, shut down
engine (TM 5-2420-222-10) and
replace as outlined in this task.
12.
Loader backhoe
Engine
If not already off, shut down
(TM 5-2420-222-10).
13.
Terminal (3)
Connector (4)
a.
If not already installed, push on.
b.
If present, take off tag.
TASK ENDS HERE
TA242940
2-470
|
