|
| |
TM 5-2420-222-20-2
Section XIV. BRAKES
Page
Page
Hydraulic Brake System Bleeding ...............2-870
Right Service Brake Line and
Left Service Brake Line and
Fittings...................................................................... 2-879
Fittings .........................................................2-884
Service Brake Pedals............................................... 2-891
Parking Brake Adjustment...........................2-867
Service Brake Special Screw ................................... 2-876
Parking Brake Lever and Linkage ...............2-855
PARKING BRAKE LEVER AND LINKAGE
This task covers:
a.
Removal (page 2-856)
d.
Inspection/Replacement (page 2-862)
b.
Disassembly (page 2-858)
e.
Assembly (page 2-862)
c.
Cleaning (page 2-861)
f.
Installation (page 2-864)
INITIAL SETUP
Tools
Tools - Continued
Hammer, ball-peen, 2-pound head
NOTE
Handle, ratchet, 1/2-inch drive
Pliers, retaining ring
The following tools only apply
Pliers, slip-joint
to loader backhoes with Serial
Press, arbor
Numbers 319995 thru 342573.
Punch, drive-pin, straight, 1/4-inch
Remover and installer, 1.0625-inch
Socket, 1/2-inch drive, 15/16-inch
outside diameter
Wrench, box, 15/16-inch
Screwdriver, flat-tip, 3/8-inch
Socket, 1/2-inch drive, 3/4-inch
Materials/Parts
Vise, machinist’s
Wrench, box, 3/4-inch
Detergent, GP (item 7, Appendix C)
Grease, (LO 5-2420-222-12)
NOTE
Lockwasher, latch plate screw (two required)
Lockwasher, support screw (two required)
The following tools only apply
Pin, cotter, brake latch
to loader backhoes with Serial
Pin, cotter, brake rod pin (two required)
Numbers 235786 thru 235999.
Pin, cotter, brake latch pin
Rags, wiping (item 21, Appendix C)
Socket, 1/2-inch drive, xx-inch
Solvent, drycleaning (item 28, Appendix C)
Stud remover and setter, 1/2-inch
drive
NOTE
Wrench, open-end, xx-inch
The following parts only apply
to loader backhoes with Serial
Numbers 235786 thru 235999.
Locknut, support screw (two required)
2-855
|
