|
| |
TM 5-2420-222-20-2
TRANSMISSION STRAINER ELEMENT (FILTER SCREEN) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
CAUTION
Screen must be bent to one side during removal. Make sure that screen does not hang up on
transmission case threads or it may be damaged. Pieces of plastic may enter and contaminate hydraulic
system.
6.
Transmission
Strainer element
a.
Take out.
case (1)
or screen (2)
b.
Get rid of drained fluid (page 2-137).
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use
near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become
dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is
made, wash your eyes with water and get medical aid immediately.
7.
All metal parts
a.
Clean in drycleaning solvent.
except strainer
b.
Using clean, dry rag, wipe dry.
element or screen (2)
WARNING
No open flames, welding, grinding, smoking or use of heat producing devices permitted nearby when
using fuel. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to observe
these precautions could cause serious injury.
8.
Strainer element
a.
Clean in diesel fuel.
or screen (2)
b.
Using clean, dry rag, wipe off.
c.
Allow to airdry.
2-850
|
