|
| |
TM 5-2420-222-20-2
HYDRAULIC OIL COOLER - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install hood (page 2-1025).
2.
Remove loader bucket support (page 2-1830).
TASK ENDS HERE
TRANSMISSION STRAINER ELEMENT (FILTER SCREEN)
This task covers:
a.
Removal (page 2-848)
d.
Inspection/Replacement (page 2-851)
b.
Cleaning (page 2-850)
e.
Installation (page 2-852)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Container, flexible, 1-gallon
Rags, wiping (item 21, Appendix C)
Knife, pocket
Solvent, drycleaning (item 28, Appendix C)
Screwdriver, flat-tip, 1/4-inch
Spacer, ring
Screwdriver, flat-tip, 5/8-inch
Wrench, box and open-end,
Personnel Required
combination, 1 7/8-inch
One
Materials/Parts
Equipment Condition
Detergent, GP (item 7, Appendix C)
Fuel, diesel (item 8, Appendix C)
Transmission drained (page 2-811)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Loader backhoes with Serial Numbers 235786 thru 235999 have strainer element. Loader backhoes with
Serial Numbers 319995 thru 342573 have screen. Both are maintained the same way.
REMOVAL
1.
Hose (1)
Two clamps (2 and 3)
a.
Place 1-gallon flexible container
underneath.
b.
Using 1/4-inch flat-tip screwdriver,
unscrew and take off.
2-848
|
