|
| |
TM 5-2420-222-20-2
TRANSMISSION OIL FILTER
This task covers:
a.
Removal (page 2-836)
d.
Inspection/Replacement (page 2-838)
b.
Disassembly (page 2-838)
e.
Assembly (page 2-839)
c.
Cleaning (page 2-838)
f.
Installation (page 2-840)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Container, 1-gallon
Packing, cover
Handle, ratchet, 1/2-inch drive
Packing, retainer
Knife, pocket
Rags, wiping (item 21, Appendix C)
Pliers, retaining ring
Solvent, drycleaning (item 28,
Socket, 1/2-inch drive, 3/4-inch
Appendix C)
Wrench, torque, 1/2-inch drive,
0 to 150 foot-pound capacity
Personnel Required
Materials/Parts
Two
Element
Fluid, hydraulic (LO 5-2420-222-12)
Packing, capscrew
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Be careful when draining hot fluids. Wear gloves to protect your hands from hot parts and fluids or severe
burns could result.
1.
Cover (1) and
Special cap
a.
Place 1-gallon container underneath.
transmission
screw (3)
b.
Hold cover (1) in place.
case (2)
c.
Using 3/4-inch, 1/2-inch drive socket
socket and ratchet handle, loosen.
2-836
|
