|
| |
TM 5-2420-222-20-2
STARTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
15.
Flywheel
Stud (3)
If removed, screw in and tighten using
housing (2)
stud remover and setter and 1/2-inch
drive ratchet handle.
CAUTION
Do not push starter straight into flywheel housing. Angle front of starter toward engine during
installation to clear flywheel teeth. Damage to flywheel teeth will cause rapid wear.
16.
Flywheel
Starter (1)
Put into place.
housing (2)
and stud (3)
17.
Stud (3) and
New lockwasher (4)
Screw on until snug.
starter (1)
and nut (5)
TA242937
2-465
|
