|
| |
TM 5-2420-222-20-2
MAIN AND FRONT LIGHT WIRING HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
87.
Ignition switch
Terminal (2)
a.
Put on.
ACC terminal (1)
b.
Take off tag.
88.
Ignition switch
New lockwasher (3)
Screw on and tighten using 3/8-inch box
ACC terminal (1)
and nut (4)
wrench.
and terminal (2)
89.
Ignition switch
Terminal (5)
a.
Put on.
ACC terminal (1)
b.
Take off tag.
90.
Ignition switch
New lockwasher (6)
Screw on and tighten using 318-inch box
ACC terminal (1)
and nut (7)
wrench.
and terminal (5)
NOTE
Loader backhoes with Serial Numbers 235786 thru 235999 have connector on main harness
connected to connector on cold weather starting aid wiring harness. Loader backhoes with Serial
Numbers 319995 thru 342573 connector on main harness connected to connector on parking
brake wiring harness.
91.
Cold weather
Connector (10)
a.
Plug in.
starting aid
b.
Take off tag.
harness connector
(8) or parking brake
wiring harness
connector (9)
92.
Two starter switch
Connector (12)
a.
Push on.
terminal (11)
b.
Take off tag.
93.
Two starter neutral
Connector (14)
a.
Push on.
safety switch
b.
Take off tag.
terminals (13)
NOTE
Step 94 only applies to loader backhoes with Serial Numbers 31995 thru 342573.
94.
Connector(15)
Connector (16)
a.
Plug in.
b.
Take off tag.
2-794
|
