TM 5-2420-222-20-2 MAIN AND FRONT LIGHT WIRING HARNESS - CONTINUED ACTION LOCATION ITEM REMARKS REMOVAL - CONTINUED 44. Ac generator Nut (3), lockwasher a. Using 7/16-inch box wrench, unscrew terminal (1) and (4), and insulator and take off. terminal (2) washer (5) b. Get rid of lockwasher (4). 45. Ac generator Terminal (2) a. Tag (page 2-137). terminal (1) b. Take off. 46. Starter solenoid Nut (9) and a. Using 9/16-inch box wrench, unscrew terminal (6), lockwasher (10) and take off. battery cable b. Get rid of lockwasher (10). terminal (7), and terminal (8) 47. Starter solenoid Battery cable a. Tag (page 2-137). terminal (6) terminal (7) and b. Take off. terminal (8) 48. Starter solenoid Nut (13), and a. Using 11/32-inch box wrench, unscrew terminal (11) lockwasher (14) and take off. and terminal (12) b. Get rid of lockwasher (14). 49. Starter solenoid Terminal (12) a. Tag (page 2-137). terminal (11) b. Take off. 50. Engine oil Connector (16) a. Tag (page 2-137). pressure switch b. Take off. terminal (15) 51. Fuel injection Self-locking a. Using 11/32-inch, 1/4-inch drive pump solenoid nut (19) socket and ratchet handle, unscrew terminal (17) and take off. and terminal (18) b. Get rid of. 52. Fuel injection Terminal (18) a. Tag (page 2-137). pump solenoid b. Take off. terminal (17) 53. Engine block (19) Main wiring harness a. Note routing for proper placement fuel shutoff  during installation. lead (20) b. Take off. 2-784