|
| |
TM 5-2420-222-20-2
MAIN AND FRONT LIGHT WIRING HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
14. Clamp (1)
Screw (2),
a.
Using 11/16-inch box wrench, 11/16-
nut (3), and
inch, 3/8-inch drive socket and
lockwasher (4)
ratchet handle, unscrew and take out.
b.
Get rid of lockwasher (4).
15. Front light wiring
Clamp (1)
Take off.
harness (5) or main
wiring harness (6)
NOTE
Step 16 only applies to loader backhoes with Serial Numbers 235786 thru 235999.
16. Loader backhoe
Front light wiring
a.
Note routing for proper placement
harness (5)
during installation.
b.
Take out.
17. Cowl support (7)
Plastic bands (9)
a.
If present, note number and location
and main wiring
for proper placement during
harness (8 or 6)
installation.
b.
Using diagonal-cutting pliers, cut off.
c.
Get rid of.
18. Light switch
Connector (11)
a.
Tag (page 2-137).
B terminal (10)
b.
Unplug.
19. Instrument panel
Connector (13)
a.
Using 1/8-inch flat-tip screwdriver,
wiring harness
lift tab on connector (13).
connector(12)
b.
Unplug.
NOTE
Steps 20 and 21 only apply to loader backhoes with Serial Numbers 319995 thru
342573.
20. Horn switch
Connector (15)
a.
Tag (page 2-137).
two terminals (14)
b.
Pull off.
21. Time total meter
Connector (17)
a.
Tag (page 2-137).
terminal (16)
b.
Pull off.
2-778
|
