|
| |
TM 5-2420-222-20-2
COMBINATION TAIL AND STOPLIGHT LEADS (SERIAL NUMBERS 319995 THRU 342573 ONLY) -
CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Connect battery ground cable (page 2-696).
TASK ENDS HERE
WARNING LIGHT LEADS
This task covers:
a. Removal (page 2-766)
d. Repair (page 2-770)
b. Cleaning (page 2-768)
e. Installation (page 2-771)
c. Inspection/Replacement (page 2-770)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Screwdriver, flat-tip, 3/16-inch
Tape, lacing and tying (item 33, Appendix C)
Materials/Parts
Personnel Required
Cleaning compound, solvent
One
(item 4, Appendix C)
Detergent, GP (item 7, Appendix C)
Equipment Condition
Rags, wiping (item 21, Appendix C)
Solvent, drycleaning
Battery ground cable disconnected
(item 28, Appendix C)
(page 2-696)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both warning light leads are maintained the same way. One side is shown. Repeat
procedures for other side as needed.
REMOVAL
1. Connector (1)
Connector (3)
a.
Tag connector (1) or connector (2)
or connector (2)
(page 2-137).
b.
Unplug.
2-766
|
