|
| |
TM 5-2420-222-20-2
STOPLIGHT WIRING HARNESS - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install loader control box door (page 2-1167).
2. Connect battery ground cable (page 2-696).
TASK ENDS HERE
COMBINATION TAIL AND STOPLIGHT LEADS (SERIAL NUMBERS 319995 THRU 342573 ONLY)
This task covers:
a. Removal (page 2-762)
d. Repair(page 2-764)
b. Cleaning (page 2-763)
e. Installation (page 2-765)
c. Inspection/Replacement (page 2-764)
INITIAL SETUP:
Tools
Personnel Required
Screwdriver, flat-tip, 1/8-inch
One
Materials/Parts
Equipment Condition
Cleaning compound, solvent
Battery ground cable disconnected
(item 4, Appendix C)
(page 2-696)
Rags, wiping (item 21, Appendix C)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both combination tail and stoplight leads are maintained the same way. One side
is shown. Repeat procedures for other side.
REMOVAL
1. Connector (1)
Connector (2)
a.
Tag (page 2-137).
b.
Unplug.
2-762
|
