|
| |
TM 5-2420-222-20-2
STOPLIGHT WIRING HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts which cannot be repaired.
22.
Stoplight wiring
a.
Look for cracked, burned, or worn
harness (1)
insulation.
b.
Look for broken wires.
c.
Look for loose and corroded terminals.
23.
Two double
Look for cracks, breaks, and corrosion
connectors (2) or
damage.
two connectors (3)
24.
Clamp (4)
Look for peeling or missing plastic
coating.
25.
All metal parts
Look for cracks, breaks, and abnormal
bends.
26.
All threaded parts
Look for damaged threads.
REPAIR
NOTE
For more information on how to repair wiring, go to General Maintenance Instructions (page 2-
137).
INSTALLATION
27.
Loader backhoe
Stoplight wiring
Route into place as noted during removal.
harness (1).
28.
Stoplight wiring
Clamp (4)
Put on.
29.
Clamp (4)
Screw (5), new
Screw in and tighten using 11/16-inch
lockwasher (6),
box wrench, 11/16-inch, 3/8-inch drive
and nut (7)
Socket, and ratchet handle.
2-758
|
