TM 5-2420-222-20-2 STARTER This task covers: a. Removal (page 2-460) d. Inspection/Replacement (page 2-464) b. Cleaning (page 2-462) e. Installation (page 2-465) INITIAL SETUP Tools Materials/Parts - Continued Crowfoot attachment, 3/8-inch Lockwasher, solenoid starting terminal drive, 9/16-inch Lockwasher, starter mounting (two required) Extension, 3/8-inch drive, 5-inch Rags, wiping (item 21, Appendix C) Handle, hinged, 3/8-inch drive Solvent, drycleaning (item 28, Appendix C) Handle, ratchet, 1/2-inch drive Tags, marking (item 30, Appendix C) Remover and setter, stud, 1/2-inch drive Personnel Required Tachometer, mechanical, hand held Test set, generator and voltage  One regulator Wrench, box, 11/32-inch Equipment Condition Wrench, box, 9/16-inch Wrench, box and open-end 9/16-inch Battery ground cable disconnected (page 2-696) Materials/Parts Cleaning compound, solvent (item 4, Appendix C) Lockwasher, battery cable solenoid terminal nut ACTION LOCATION ITEM REMARKS REMOVAL 1. Battery cable Nut (4) and a. Using 9/16-inch box wrench, unscrew terminal (1), lockwasher (5)  and take off. terminal (2), and b. Get rid of lockwasher (5). terminal (3) 2. Terminal (3)  Battery cable a. Tag (page 2-137). terminal (1) and b. Take off. terminal (2) 3. Terminal (6) and Nut (8) and a. Using 11/32-inch box wrench, unscrew terminal (7) lockwasher (9)  and take off. b. Get rid of lockwasher (9). 2-460