|
| |
TM 5-2420-222-20-2
STOPLIGHT WIRING HARNESS
This task covers:
a.
Removal (page 2-752)
d.
Repair(page 2-758)
b.
Cleaning (page 2-756)
e.
Installation (page 2-758)
c.
Inspection/Replacement (page 2-758)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 21, Appendix C)
Pliers, diagonal-cutting
Solvent, drycleaning (item 28, Appendix C)
Pliers, slip-joint
Tags, marking (item 30, Appendix C)
Socket, 3/8-inch drive, 11/16-inch
Tape, measuring, 78 3/4-inch
Personnel Required
Wrench, box, 3/8-inch
Wrench, box, 11/16-inch
One
Materials/Parts
Equipment Condition
Band, plastic, electrical tiedown
1.
Battery ground cable disconnected
(as required)
(page 2-696)
Cleaning compound, solvent
2.
Loader control box door removed
(item 4, Appendix C)
(page 2-1167)
Lockwasher, ignition switch
terminal nut
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Stoplight wiring
Plastic bands (2)
a.
Note number and location for proper
harness (1) and
placement during installation.
loader backhoe
b.
Using diagonal-cutting pliers, cut off.
c.
Get rid of.
2.
Ignition switch
Nut (5) and
a.
Using 3/8-inch box wrench, unscrew
ACC terminal (3)
lockwasher (6)
and take off.
and terminal (4)
b.
Get rid of lockwasher (6).
3.
Ignition switch
Terminal (4)
a.
Tag (page 2-137).
ACC terminal (3)
b.
Take off.
2-752
|
