|
| |
TM 5-2420-222-20-2
COMBINATION TAIL AND STOPLIGHT PLUG AND WIRE ASSEMBLIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
4.
Taillight (1) and
Boot (3)
Pull off of taillight (1).
plug (2)
5.
Taillight (1)
Plug (2) and
Push in, turn one-quarter turn clockwise,
assembled boot (3)
and take out.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Electrical parts solvent cleaning compound (trichlorotrifluoroethane) is flammable,
and reacts violently with aluminum, titanium, barium, lithium, samarium, and
sodium potassium. Cleaning compound fumes displace air and it may be
carcinogenic. Boiling point is 1140F (460C). Do not wear jewelry. Wear rubber
gloves and use only in well ventilated area. Avoid contact with skin, eyes, and
clothes and do not breathe vapors. Do not use near open flame or excessive heat.
If you become dizzy while using cleaning compound, get fresh air immediately and
get medical aid. If contact with eyes is made, wash your eyes with water and get
medical aid immediately.
6.
Plug (2)
a.
Using clean rag dampened with solvent
cleaning compound, wipe clean.
b.
Dip connectors and plug in solvent
cleaning compound.
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts which cannot be repaired.
2-748
|
