|
| |
TM 5-2420-222-20-2
REAR LIGHT WIRING HARNESSES - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Connect battery ground cable (page 2-696).
TASK ENDS HERE
COMBINATION TAIL AND STOPLIGHT PLUG AND WIRE ASSEMBLIES
This task covers:
a.
Removal (page 2-746)
d.
Repair(page 2-749)
b.
Cleaning (page 2-748)
e.
Installation (page 2-750)
c.
Inspection/Replacement (page 2-748)
INITIAL SETUP
Materials/Parts
Personnel Required
Cleaning compound, solvent
One
(item 4, Appendix C)
Rags, wiping (item 21, Appendix C)
Equipment Condition
Tags, marking (item 30, Appendix C)
Battery ground cable disconnected
(page 2-696)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both combination tail and stoplight plug and wire assemblies are maintained the same way. One
side is shown. Repeat procedures for other side as needed.
REMOVAL
NOTE
Step 1 only applies to loader backhoes with Serial Numbers 235786 thru 235999.
1.
Double
Connector (2) and
a.
Tag (page 2-137).
connector(1)
connector (3)
b.
Unplug.
2-746
|
