|
| |
TM 5-2420-222-20-2
WARNING ALARM WIRING HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
5.
Fender (1) and
Alarm wiring
Working from inside loader backhoe, pull
fender support (2)
harness (3)
through hole between fender support (2)
and fender (1).
6.
Transmission (4)
Alarm wiring
Working from hole where right platform
harness (3)
goes, pull over top of transmission (4).
7.
Alarm switch
Connector (6)
a.
Tag (page 2-137).
two terminals (5)
b.
Pull off.
8.
40 ampere circuit
Nut (9) and)
a.
Using 3/8-inch box wrench, unscrew
breaker terminal (7)
lockwasher (10)
and take off.
and terminal (8)
b.
Get rid of lockwasher (10).
9.
40 ampere circuit
Terminal (8)
a.
Tag (page 2-137).
breaker terminal (7)
b.
Take off.
10.
Cowl (11)
Alarm wiring
Note routing for proper placement during
harness (3)
installation and take out.
11.
Transmission (4)
Alarm wiring
Note routing for proper placement during
harness (3)
installation and take out.
12.
Loader backhoe
Alarm wiring
Take out.
harness (3)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
2-726
|
