|
| |
TM 5-2420-222-20-2
WARNING ALARM WIRING HARNESS
This task covers:
a.
Removal (page 2-724)
d.
Repair (page 2-728)
b.
Cleaning (page 2-726)
e.
Installation (page 2-728)
c.
Inspection/Replacement (page 2-728)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Pliers, diagonal-cutting
Tags, marking (item 30, Appendix C)
Pliers, slip-joint
Wrench, box, 3/8-inch
Personnel Required
Materials/Parts
One
Band, plastic, electrical tiedown
Equipment Condition
(as required)
Cleaning compound, solvent
1.
Battery ground cable disconnected
(item 4, Appendix C)
(page 2-696)
Lockwasher, circuit breaker nut
2.
Left platform removed (page 2-1060)
Nut, assembled washer, reverse
3.
Right platform removed (page 2-1079)
warning alarm terminal
4.
Cowl front cover removed (page 2-1020)
Rags, wiping (item 21, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Alarm wiring
Plastic bands (2)
a.
Note number and location for proper
harness (1) and
placement during installation.
loader backhoe
b.
Using diagonal-cutting pliers, cut and
take off.
c.
Get rid of.
2.
Reverse warning
Assembled washer
a.
Using 3/8-inch box wrench, unscrew
alarm terminal (3)
nut (5)
and take off.
and terminal (4)
b.
Get rid of.
3.
Reverse warning
Terminal (4)
a.
Tag (page 2-137).
alarm terminal (3)
b.
Take off.
2-724
|
