|
| |
TM 5-2420-222-20-2
BATTERY TRAY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and
clothes and don’t breathe vapors. Do not use near open flame or excessive heat.
The flashpoint is 100°F to 1380F (380 to 59°C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with
eyes is made, wash your eyes with water and get medical aid immediately.
4.
Three screws (2)
a.
Clean in drycleaning solvent.
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-137).
Replace defective parts as needed.
5.
Battery tray (1)
a.
Look for cracks, breaks, and abnormal
bends.
b.
Look for corrosion damage.
c.
Look for missing paint.
6.
Three screws (2)
a.
Look for cracks, breaks, and abnormal
bends.
b.
Look for damaged threads.
REPAIR
7.
Battery tray (1)
If paint is missing, using plastic coating
compound, paint.
INSTALLATION
8.
Transmission
Battery tray (1)
Put in place.
case (3)
2-722
|
