TM 5-2420-222-20-2 BATTERY STARTER CABLE - CONTINUED ACTION LOCATION ITEM REMARKS REMOVAL 3. Battery starter Nut (4) and a. Using 9/16-inch box wrench, unscrew cable terminal (1), lockwasher (5) and take off. terminal (2), and b. Get rid of lockwasher (5). terminal (3) 4. Terminal (3) Battery starter a. Tag (page 2-137). cable terminal (1) b. Take off. and terminal (2) 5. Two clamps (6) Two screws (7) and a. Note location of clamps for proper lockwashers (8) placement during installation. b. Using 9/16-inch, 3/8-inch drive socket and ratchet handle, unscrew and take out. c. Get rid of lockwashers (8). WARNING Do  not  smoke,  use  open  flame,  or  allow  sparks  near  batteries.    The  mixture  of oxygen  and  hydrogen  gases  released  from  batteries  is  highly  flammable  and  can explode causing serious injury or death. 6. Loader backhoe Battery starter a. Note routing for proper placement cable (9) during installation. b. Take out. 7. Battery starter Two clamps (6) a. Note routing for proper placement cable (9) during installation. b. Take off. DISASSEMBLY 8. Terminal clamp (10) Screw (11) and Unscrew and take out. nut (12) CLEANING NOTE For    more    information    on    how    to    clean    parts,    go    to    General    Maintenance Instructions (page 2-137). 2-712