|
| |
TM 5-2420-222-20-2
BATTERY CONNECTOR CABLE
This task covers:
a.
Removal (page 2-704)
d.
Inspection/Replacement (page 2-706)
b.
Disassembly (page 2-705)
e.
Assembly (page 2-707)
c.
Cleaning (page 2-705)
f.
Installation (page 2-708)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Cleaner, battery terminal
Solvent, drycleaning (item 28, Appendix C)
Puller, battery terminal
Wrench, box, 1/2-inch
Personnel Required
Wrench, open-end, 112-inch
One
Materials/Parts
Equipment Condition
Cleaning compound, solvent
Battery ground cable disconnected
(item 4, Appendix C)
(page 2-696)
Grease (LO 5-2420-222-12)
Rags, wiping (item 21, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not smoke, use open flame, or allow sparks near batteries. The mixture of
oxygen and hydrogen gases released from batteries is highly flammable and can
explode causing serious injury or death.
Electrolyte and battery corrosion can cause injury. Wear safety goggles and
gloves. If for any reason electrolyte or battery corrosion contacts the eyes, skin, or
clothing, flush immediately with large amounts of cool water and seek medical
attention immediately.
1.
Two terminal
Two screws (3 and
Using 1/2-inch open-end and 1/2-inch box
clamps (1 and 2)
4) and nuts (5
wrenches, loosen.
and 6)
2.
Right battery
Two terminal clamps
Using battery terminal puller, pull off.
positive terminal
(1 and 2) and
(7) and left battery
assembled parts
negative terminal (8)
2-704
|
