|
| |
TM 5-2420-222-20-2
REVERSE WARNING ALARM GROUND WIRE ASSEMBLY
This task covers:
a.
Removal (page 2-688)
e.
Repair (page 2-690)
b.
Cleaning (page 2-689)
f.
Installation (page 2-690)
c.
Inspection/Replacement (page2-690)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Nut, assembled washer terminal
Socket, 3/8-inch drive, 1/2-inch
Rags, wiping (item 21, Appendix C)
Wrench, box, 3/8-inch
Tags, marking (item 30, Appendix C)
Wrench, box, 1/2-inch
Personnel Required
Materials/Parts
One
Cleaning compound, solvent
(item 4, Appendix C)
Equipment Condition
Lockwasher, reverse alarm mounting
screw nut
Battery ground cable disconnected
(page 2-696)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Terminal (1)
Assembled washer
a.
Using 3/8-inch box wrench, unscrew
and terminal (2)
nut (3)
and take off.
b.
Get rid of.
2.
Terminal (1)
Terminal (2)
a.
Tag (page 2-137).
b.
Take off.
3.
Plate (4),
Screw (8), nut (9),
a.
Using 1/2-inch box wrench, 1/2-inch,
left backhoe
lockwasher (10),
3/8-inch drive socket, and ratchet
control guard (5),
and washer (11)
handle, unscrew and take off.
alarm (6), and
b.
Get rid of lockwasher (11).
terminal (7)
4.
Alarm (6)
Terminal (7) and
Take off.
assembled cable (12)
2-688
|
