|
| |
TM 5-2420-222-20-2
FUEL GAGE SENDER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
14. Sender (1)
Screw (3), new
Screw in part way.
lockwasher (7),
and washer (4)
15. Screw (1),
Terminal (4)
Push in between lockwasher (2) and
lockwasher (2),
washer (3).
and washer (3)
16. Sender (5) and
Screw (1)
Using 1/4-inch flat-tip screwdriver,
terminal (4)
tighten.
CAUTION
Do not fill fuel tank with fuel for at least one hour after fuel gage sender installation to allow
sealing compound time to set. If filled too soon, fuel tank may leak around sender screws.
17. Loader backhoe
Fuel tank
Fill (TM 5-2420-222-10).
18. Fuel tank (6)
Sender (5) and
a.
Check for leaks.
five screws (7)
b.
If leaking, using 1/4-inch flat-tip
screwdriver, tighten screws (7).
c.
If leaking does not stop, use more
gasket sealing compound on screws (7)
or replace defective parts as outlined
in this task.
2-666
|
