|
| |
TM 5-2420-222-20-2
WARNING LIGHT FLASHER AND BRACKET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2. Connector (1)
Flasher (2)
a.
Tag connector (1) (page 2-137).
b.
Unplug and take out.
NOTE
If removing flasher only, do not remove bracket.
Loader backhoes with Serial Numbers 319995 thru 342573 have one terminal on cowl support stud.
Loader backhoes with Serial Numbers 235786 thru 235999 have more than one terminal on cowl support
stud. Configuration for loader backhoes with Serial Numbers 319995 thru 342573 is shown.
3. Bracket (3),
Nut (6) and
a.
Using 7/16-inch, 3/8-inch drive deep
terminal (4),
lockwasher (7)
socket and ratchet handle, unscrew
and cowl support
and take out.
stud (5)
b.
Get rid of lockwasher (7).
4. Cowl support
Terminal (4) and
a.
Tag terminal (4) (page 2-137).
stud (5)
bracket (1)
b.
Take off.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
5.
Flasher (2)
Using clean, dry rags, wipe clean.
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors.
Do not use near open flame or excessive heat. The flashpoint is 100° to 138°F (38° to 59°C). If you
become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
6.
All other metal
a.
Clean in drycleaning solvent.
parts
b.
Using clean, dry rags, wipe dry.
2-658
|
