|
| |
TM 5-2420-222-20-2
FRONT LIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT
NOTE
If front light has just been installed, skip step 35.
35. Front light (7) and
Nut (12)
a.
Using 3/4-inch open-end wrench,
light bracket (10)
loosen.
b.
Tighten just until snug.
Front light must be free enough to
adjust but tight enough to hold
position.
36. Light bracket (10)
Screw (20) and
a.
Using 9/16-inch box wrench, 9116-
side frame (14)
nut (21)
inch, 3/8-inch drive socket, and
and pin (19)
ratchet handle, loosen.
b.
Tighten just until snug.
Front light must be free enough to
adjust but tight enough to hold
position.
TA243035
2-655
|
