|
| |
TM 5-2420-222-20-2
FRONT LIGHTS
This task covers:
a. Removal (page 2-648)
e.
Repair (page 2-653)
b. Disassembly (page 2-650)
f.
Assembly (page 2-653)
c. Cleaning (page 2-650)
g.
Installation (page 2-654)
d. Inspection/Replacement (page 2-652)
h.
Adjustment (page 2-655)
INITIAL SETUP
Tools
Materials/Parts - Continued
File, thread restoring
NOTE
Handle, ratchet, 3/8-inch drive
Screwdriver, flat-tip, 3/16-inch
The following part only applies
Socket, 3/8-inch drive, 9/16-inch
to loader backhoes with Serial
Wrench, box, 9/16-inch
Numbers 319995 thru 342573.
Wrench, open-end, 3/4-inch
Lockwasher, front light nut
Materials/Parts
Personnel Required
Cleaning compound, solvent
(item 4, Appendix C)
One
Detergent, GP (item 7, Appendix C)
Rags, wiping (item 21, Appendix C)
Equipment Condition
Solvent, drycleaning
(item 28, Appendix C)
Battery ground cable disconnected
Tags, marking (item 30, Appendix C)
(page 2-696)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both front lights are maintained the same way. One light is shown. Repeat procedures for other
light as needed.
REMOVAL
NOTE
It is not necessary to remove front light to disassemble it.
1. Connector (1)
Connector (2)
a.
Tag (page 2-696).
b.
Unplug.
2-648
|
