|
| |
TM 5-2420-222-20-2
AC GENERNATOR PULLEY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
Do not remove woodruff key unless inspection shows need for replacement.
3.
Rotor shaft (2)
Woodruff key (6)
Using 1/8-inch straight drive-pin punch,
and 1-pound head ball-peen hammer, tap
out.
NOTE
Steps 4 and 5 apply only if you are preparing ac generator for exchange.
4.
Rotor shaft (2)
Woodruff key (6)
If not removed, wrap shaft (2) and key (6)
with pressure sensitive tape.
5.
Nut (3)
Screw on but do not tighten.
TA242929
2-449
|
