|
| |
TM 5-2420-222-20-2
COMBINATION TAIL AND FLOODLIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
40. Combination
Spherical
Put on.
taillight (1)
washer (2)
41. Fender (3)
Combination
a.
Using fine abrasive paper, clean fender
taillight (1)
(3) down to bare metal where taillight
(1) will mount so taillight will have
good ground.
b.
Put in place.
42. Combination
Special washer (4)
Put on.
taillight (1) and
fender (3)
43. Combination
New lockwasher (5)
Screw on until snug.
taillight (1) and
and nut (6)
special washer (4)
44. Connector (7)
Connector (8)
a.
Plug in.
b.
Take off tags.
45. Connector (9)
Connector (10)
a.
Plug in.
b.
Take off tags.
46. Battery
Battery ground cable
Connect (page 2-696).
ADJUSTMENT
NOTE
If combination tail and floodlight was just installed, skip step 47.
47. Combination
Nut (6) and
a.
Using 3/4-inch open-end wrench,
taillight (1) and
lockwasher (5)
loosen.
special washer (4)
b.
Tighten until snug.
48. Ignition
Key (12)
a.
Put in.
switch (11)
b.
Turn clockwise.
49. Cowl (13)
Light switch (14)
Turn clockwise to F position.
50. Fender (3)
Combination
Aim for best illumination of work area.
taillight (1)
2-646
|
