|
| |
TM 5-2420-222-20-2
COMBINATION TAIL AND FLOODLIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
WARNING
Electrical parts solvent cleaning compound (trichlorotrifluoroethane) is flammable, and reacts
violently with aluminum, titanium, barium, lithium, samarium, and sodium potassium. Cleaning
compound fumes displace air and it may be carcinogenic. Boiling point is 114°F (46°C). Do not
wear jewelry. Wear rubber gloves and use only in well ventilated area. Avoid contact with skin,
eyes, and clothes and do not breathe vapors. Do not use near open flame or excessive heat. If
you become dizzy while using cleaning compound, get fresh air immediately and get medical aid.
If contact with eyes is made, wash your eyes with water and get medical aid immediately.
19.
Combination tail-
a.
Using rag dampened with solvent
light (1), sealed
cleaning compound, wipe clean.
unit (2), lamp (3),
b.
Using clean, dry rags, wipe dry.
and socket (4) with
assembled lead (5)
20.
Special washer (6)
a.
Clean in solvent cleaning compound.
and spherical
b.
Using clean, dry rags, wipe dry.
washer (7)
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors.
Do not use near open flame or excessive heat. The flashpoint is 100° to 138° (38° to 59°C). If you
become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
21.
All other metal
a.
Clean in drycleaning solvent.
parts
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts which cannot be repaired.
2-642
|
