|
| |
TM 5-2420-222-20-2
COMBINATION TAIL AND STOPLIGHTS - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Connect battery ground cable (page 2-696).
TASK ENDS HERE
COMBINATION TAIL AND FLOODLIGHTS
This task covers:
a.
Removal (page 2-638)
e.
Repair (page 2-644)
b.
Disassembly (page 2-640)
f.
Assembly (page 2-644)
c.
Cleaning (page 2-641)
g.
Installation (page 2-646)
d.
Inspection/Replacement (page 2-642)
h.
Adjustment (page 2-646)
INITIAL SETUP
Tools
Materials/Parts - Continued
File, thread restoring
Rags, wiping (item 21, Appendix C)
Screwdriver, flat-tip, 3/16-inch
Solvent, drycleaning (item 28, Appendix C)
Wrench, open-end, 3/4-inch
Tags, marking (item 30, Appendix C)
Materials/Parts
Personnel Required
Cleaning compound, solvent
One
(item 4, Appendix C)
Detergent, GP (item 7, Appendix C)
Equipment Condition
Lockwasher, combination tail and
floodlight nut
Battery ground cable disconnected
Paper, abrasive, fine (item 20,
(page 2-696)
Appendix C)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both combination tail and floodlights are maintained the same way. One side is shown. Repeat
procedures for other side as needed.
REMOVAL
NOTE
It is not necessary to remove combination tail and floodlight to disassemble it.
2-638
|
