|
| |
TM 5-2420-222-20-2
TURN SIGNAL SWITCH IN-LINE FUSE - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install cowl front cover (page 2-1020).
2. Connect battery ground cable (page 2-696).
TASK ENDS HERE
ENGINE STARTING AID SOLENOID SWITCH
This task covers:
a. Removal (page 2-604)
d. Repair(page 2-607)
b. Cleaning (page 2-605)
e. Installation (page 2-607)
c. Inspection/Replacement (page 2-606)
INITIAL SETUP:
Tools
Personnel Required
File, thread restoring
One
Materials/Parts
Equipment Condition
Cleaning compound, solvent
1. Battery ground cable disconnected
(item 4, Appendix C)
(page 2-696)
Detergent, GP (item 7, Appendix C)
2. Loader control box door removed
Rags, wiping (item 21, Appendix C)
(page 2-1167)
Solvent, drycleaning
(item 28, Appendix C)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Two terminals (1)
Connector (2)
a.
Tag (page 2-137).
b.
Pull off.
CAUTION
Unscrew cap by metal base to keep from tearing rubber cover.
2. Switch (3) and
Cap (5)
Unscrew and take off.
control box (4)
2-604
|
