|
| |
TM 5-2420-222-20-2
TURN SIGNAL SWITCH - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install plexiglass dash cover (page 2-576).
2. Install cowl front cover (page 2-1020).
3. Connect battery ground cable (page 2-696).
TASK ENDS HERE
TURN SIGNAL SWITCH IN-LINE FUSE
This task covers:
a. Removal (page 2-602)
c. Installation (page 2-603)
b. Testing (page 2-603)
INITIAL SETUP:
Tools
Equipment Condition
Multimeter
1.Battery ground cable disconnected
(page 2-696)
Personnel Required
2.
Cowl front cover removed (page 2-1020)
One
ACTION
LOCATION
ITEM
REMARKS
NOTE
Turn signal switch in-line fuse and fuse holder may not be present on some loader
backhoes.
REMOVAL
1. Fuseholder
Fuseholder cover (3)
Push in, turn one-quarter turn counter-
socket (1) and
clockwise, and take off.
fuse (2)
2. Fuse holder
Fuse (2)
Take out.
socket (1)
2-602
|
