|
| |
TM 5-2420-222-20-2
TURN SIGNAL SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
25. Bracket (1),
Two screws (5)
Screw in and tighten using 7/16-inch box
dash (2), cowl (3),
wrench.
and two U-type clip
nuts (4)
26. Dash (2) and
Grommet (7)
Using 1/4-inch flat-tip screwdriver, work
cable (6)
into place.
27. Reverser control
Neutral latch (9)
Put in place.
lever (8)
28. Neutral latch (9)
Spring pin (10)
Using 1-pound head ball-peen hammer and
and reverser
5/32-inch straight drive-pin punch,
control lever (8)
drive in.
29. Warning light
Connector (12)
a.
Push on.
flasher three
b.
Take off tags.
terminals (11)
30. Connector(13)
Connector (14)
a.
Plug in.
b.
Take off tags.
31. Connector (15)
Connector (16)
a.
Plug in.
b.
Take off tags.
NOTE
Warning flasher terminal connects to 20 ampere circuit breaker front terminal on
loader backhoes with Serial Numbers 235786 thru 235999 and to rear terminal on
loader backhoes with Serial Numbers 319995 thru 342573.
32. Terminal (17 or 18)
Warning flasher
a.
Put on.
and nut (19 or 20)
terminal (21)
b.
Take off tag.
33. Warning flasher
New lockwasher (22)
Screw on and tighten using 3/8-inch box
terminal (21) and
and nut (23)
wrench.
terminal (17 or 18)
2-600
|
